Auto-Retract Roller Boxes

/Auto-Retract Roller Boxes
  • These auto-retract roller boxes are manufactured to a modular construction where the main body remains constant. Various back plates are available, not only to suit the recommendations shown. Back plates and shanks can be supplied to suit a wide variety of machines including CNC lathes, etc., including Wickman Type Centre Block Fitting. The length of turn can also be modified to suit your requirements.

    Capacity

    • Metric : 10mm – 51mm
    • Imperial : 3/8" – 2"

    Shank Diameter

    • Available on request
    Download Data Sheet & Spares Info
  • These auto-retract roller boxes are manufactured to a modular construction where the main body remains constant. Various back plates are available, not only to suit the recommendations shown. Back plates and shanks can be supplied to suit a wide variety of machines including CNC lathes, etc., including Wickman Type Centre Block Fitting. The length of turn can also be modified to suit your requirements.

    Capacity

    • Metric : 6mm – 35mm
    • Imperial : 15/64" – 1 1/4"

    Shank Diameter

    • Available on request
    Download Data Sheet & Spares Info
  • A smaller version of AR/T5-M – again manufactured to a modular construction. The box can be supplied with either shank mounting or flange fitting to suit a variety of capstans, autos and CNC machines, also Wickman Type Centre Block Stations are available. AR/T9-MS Shank Mounting.

    Capacity

    • Metric: 5mm - 25mm

    Shank Diameters

    • Metric: 16mm, 20mm, 22mm 25mm, 32mm, 40mm 50mm
    • Imperial: 5/8", 3/4", 1", 1 1/4" 1 1/2", 1 3/4", 2"
    Download Data Sheet & Spares Info
  • The smallest auto-retract roller box in the range, but still offering the following facilities: Auto-retraction, integral tipholder capable of holding indexable inserts with a variety of cutting geometrics, micro-adjustment of size, and a range of metric and imperial shank sizes.

    Technical Data

    Mainly used on single and multispindle autos and CNC.
    • BSA 5/8" 3/4", 68, 18L, 25L, 68L, 88L, CVA.12.
    • B&S O.G. Accuratool 6C & 6D

    Capacity

    • Metric: 1.5mm - 10mm Imperial: 1/16" - 3/8"

    Shank Diameters

    • Metric : 16mm, 20mm, 25mm Imperial : 5/8", 3/4", 1"
    Download Data Sheet & Spares Info
  • Slightly larger auto-retract roller box with more capacity, but offering the same facilities of auto-retraction integral tip holder taking triangular or rhomboidal inserts with a variety of cutting geometrics, micro-adjustment of size, and a range of metric and imperial shank sizes. Suitable for small diameter turning on CNC lathes.

    Technical Data

    Mainly used on single and multispindle autos & CNC.
    • BSA 5/8" 3/4", 68, 18L, 25L, 68L, 88L, CVA.12
    • B&S O.G. Accuratool 6C & 6D

    Capacity

    • Metric : 3mm – 14.5mm
    • Imperial : 1/8" – 9/16"

    Shank Diameters

    • Metric : 16mm, 20mm, 25mm
    • Imperial : 5/8", 3/4", 1"
    Download Data Sheet & Spares Info